Thickness Planer | search
Click here to view Thickness Planer news from 60+ newspapers.
Bookmark or Share- CUTECH 40200H-CT Thickness Planer Review - Woodworking TalkThe thickness indicator on the side is very legible and was dead on, - I checked the resulting thickness with digital calipers and it matched the thickness indicator scale beyond the point of resolution of my eye. Then I ran a 12 inch wide pine board through and confirmed that thickness of both edges is equal.
- Jointing long boards with thickness planer - Woodworking TalkThe thickness planer removes material off the top "surface" of a board making it a uniform "thickness" and parallel to the bottom surface. It will not make an edge "square" to a side surface, only a jointer can do that. Some woodworkers run their boards through a thickness planer on edge, sometimes in multiples, to get them a unifrom width, but ...
- how to deal with thickness planer snipe | Woodworking TalkLifting the work piece trailing edge as the work piece enters the planer, and lifting the leading edge of the work piece as the work piece exits the planer will reduce snipe too. Even my DeWalt 735 four post planer snipes, but it is so little that a few swipes of sandpaper eliminates the snipe line.
- Best Collection System for Thickness Planer? - Woodworking TalkSaw a number of different chip collection setups for a planer. Very simple for a DeWalt 735. You need (preferably) a 4 inch hose from the planer to an input connector on top of a box or, possibly, a nice sized trash barrel. What you do need is an exit for the pressurized air.
- Which planer for 2x4? - Woodworking TalkA planer aka, thickness planer makes a board a uniform thickness along it's length. You still need a flat surface on the bottom to start with from the jointer IF it's not flat already. Jointing and gluing boards with good results is a simple woodworking project, BUT you must start with straight and square edges or the glue bond will not be ...
More
