Stereolithography | search
Click here to view Stereolithography news from 60+ newspapers.
Bookmark or Share- Solved Assume the line width in a stereolithography - CheggEngineering; Mechanical Engineering; Mechanical Engineering questions and answers; Assume the line width in a stereolithography operation is 0.20 mm. Estimate the time (in seconds) required to cure a layer defined by a 48-mm-diameter circle of the adjacent lines overlap each other by 15% and the laser traverse rate is 0.25 m/s.
- Solved SLA (Stereolithography) and FDM (Fused Deposition - CheggSLA (Stereolithography) and FDM (Fused Deposition Modeling) 3D printer Compare technologies by drawing figures. Your solution’s ready to go! Our expert help has broken down your problem into an easy-to-learn solution you can count on.
- Solved Stereolithography (SLA) and Solid Ground Curing (SGC) - CheggStereolithography Stereolithography is a technique for layer by layer structure fabrication, where a laser beam is focused to a free surface of a photosensitive liquid to induce polymerization of the liquid in that region and transform it to a polyme …View the full answer
- Solved A prototype of a part is to be fabricated | Chegg.comIn the stereolithography process, the layer thickness = 0.15 mm. Diameter of the laser beam spot = 0.40 mm, and the beam is moved across the surface of the photopolymer at a velocity of 2200 mm/s. Compute the minimum possible time (use units of hours, 3 significant figs) required to build the part, if 25 s are lost each layer to lower the ...
- Solved A cone-shaped part is to be fabricated using - CheggA cone-shaped part is to be fabricated using stereolithography. The radius of the cone at its base = 35 mm, and its height=100 mm. To minimize the staircase effect, layer thickness =0.04 mm. The diameter of the laser beam is 0.22 mm and the beam is moved across the surface of the photopolymer at a velocity of the 900mm/s.
More
