Shopbot | search
Click here to view Shopbot news from 60+ newspapers.
Bookmark or Share- Where are my Shopbot Post Processors?? - Vectric CustomerI upgraded to Aspire 10 then to 10.018 last week. I did my first designs today and when I went to save the toolpaths my standard post-processor (shopbot arcs/inches with speed) is gone. The only Shopbot post processors on the list are Shopbot TC inch and Shopbot TC mm. What gives? Responses appreciated as I need to run parts! Thanks, Mark
- Shark H4 vs Shopbot Desktop - Vectric CustomerPS I use a router and have never owned a spindle. I am not much more than a hobbyist myself, but do nothing but 3-d, well almost nothing. So my shopbot buddy is not cutting daily, but when i do cut its hours of cutting. Here is a random sample what the shopbot buddy can do. Again the forum and customer service are outstanding.
- Which Post Processor for ShopBot PRSalpha BT32 - Vectric CustomerHi, I just purchased ShopBot PRSalpha BT32 and Aspire V3. I will soon have a job, which requires use of several tool bits meaning manual tool change during the job. As I unerstand, this work should be possible to run with single "sbp" file using ShopBot manual tool change capability (program will stop and ask for tool change).
- Laser Module - Vectric CustomerVectric and Shopbot have had a close collaboration for more years than I can remember, long before many of the other CNC manufacturers started, I would have hoped they might have worked together with an option for the many Shopbotters, a market of possible 10,000 Botters. Paul
- Which ShopBot post processor? - Vectric CustomerFor My Bot I use Shopbot TC(Inch)(*.sbp) The TC allows for tool change so all toolpaths can be saved in one file. I don't know if this something new or it was something Ryan created for our Bot. Seems to work seamlessly.We have a non typical alpha with 2 z axis and 2 air drills mounted on the z axis but the PP just uses the main z axis and ...
More
