Rmaa | search
Click here to view Rmaa news from 60+ newspapers.
Bookmark or Share- Focusrite Clarett 2Pre USB - Audio Science Review (ASR) ForumCouple of RMAA test results too, first done on 2 V RMS, but the second on 3.85 V RMS (due to the digital volume control I needed to choose between 3.85 V and 4.34 V and I was choosing the one more close to 4 V RMS).
- Could someone explain the RMAA test? - Audio Science Review (ASR) ForumRMAA isn't a test, it's a piece of free software. With RMAA and a soundcard, you can run some very basic tests (frequency response, crosstalk, distortion), but it's not as versatile or reliable as good software like ARTA or Virtins MI. And you're limited by the performance of the soundcard and will also need to add some signal conditioning.
- Focusrite Scarlett 2i2 Audio Interface Gen 3 ReviewPretty sure that's a software / processing artifact, I've seen similar when distortion over frequency was being measured. You can try recording some of your noise floor and using the spectrum analyzer function built into RMAA (N = 16384, Kaiser-Bessel window, beta = 20).
- RME ADI-2 DAC FS - Audio Science Review (ASR) Forum- Software : RMAA 6.4.5 PRO, Multitone Loopback Analyzer 1.0.15 and REW V5.20.7. - Method : 8 runs for each test, then I choose the closest to the average. All regular tests are running 24bits / 44.1Khz except for Jitter and Multitone ones. - RME ADI-2 DAC: Set to Auto Ref Level - On, with multiple levels used, see details. Both units are ...
- Behringer UMC204HD interface for RMAA DAC testIasi, RO. Sep 23, 2019. #6. The MIC input seems to be saturated, probably because of the output voltage coming from the Cambridge DAC. You might want to lower the output volume of the Cambridge DAC or use -3 dB or even -6 dB sinewaves for this test (or adjust RMAA levels accordingly).
More
