Replacing | search
Click here to view Replacing news from 60+ newspapers.
Bookmark or Share- Mini 3 pro Gimbal Calibration after new gimbal replacement.I got mini 3 pro and replaced its gimbal. Now when I previously replaced it, I did firmware refresh and it automatically got calibrated and was perfectly fine. Now this time no firmware refresh is working and there is no way to calibrate it like how we used to do in Mavic 2 pro, Air2/s. Anybody...
- Replacing a 3.7v Lithium with a Fixed Power Supply?Normally, I have one of those dash camera systems in the car. In addition to drawing power off the car's 12V lighter port, the recorder contains a 3.7v 1100 mAh lithium ion battery. I suspect our recent wave of hot weather damaged the battery, because a couple days ago I found the recorder...
- Replacing a ceiling fan pull switch | Electronics Forum (Circuits ...Hey all! I need to repair a ceiling fan. It is a combined 5 bulb light fixture with a 3 speed fan. There is one pull switch for the light and one for the fan. The string coming out of the pull switch for the fan went off. It went off inside the switch so the whole switch needs to be replaced...
- Gimbal Ribbon Cable Replaced - Gimbal still not functioningIm thinking its your gimbal pitch motor. Yaw motor looks ok, and roll motor centers, but the pitch motor snaps the gimbal too far back. You can try replacing the gimbal assembly and see if that helps. The next culprit could be your gimbal board inside the Mavic.
- Replacing relays with MOSFETs | Electronics Forum (Circuits, Projects ...Are there any disadvantages to replacing relays in a 12 volt automotive environment with MOSFETs? I've already built a solid state indicator flasher using MOSFETs to drive high power Luxeon LEDs that has been in continuous use for a day on the bench flashing merrily away without any problems.
More
