Ramped | search
Click here to view Ramped news from 60+ newspapers.
Bookmark or Share- What is difference in these two types of ramped barrels?On a Wilson/ Nowlin cut both the upper and lower cut are cut square or flat on the Para /Clark cut the lower cut is a radius cut. Many feel the radius cut is stronger. Also keep in mind the Clark and the Para are two different cuts. The radius for the Para cut is set back farther than the Clark cut. The Para Clark cut Ramp failures are almost ...
- Convert a ramped barrel frame to standard barrel frame?JeepsAndGuns said: Yes, for a frame that has been cut for clark/para or wilson/nowlin style ramped barrel. Because 45 ramped barrels seem to be a feeding nightmare. Just do a internet search of 1911 45 ramped barrel feeding issues and you will get lots of results.
- Ramped vs Unramped Barrel - 1911ForumRamped barrels usually offer better case support up to the extractor groove of the brass case. This ensures better case head support, so hot loads (+P+)can usually be used without the worry of case rupture. Ramped barrels have a built in feed ramp, so caliber conversions are much easier for a frame that has a ramped cut of the same spec.
- What is it about minor-caliber rounds and ramped barrels...The picture below shows a non-ramped barrel and a ramped barrel side by side with a round in the chamber. The barrels are un touched. The non-ramped barrel as supplied has an angle of approximately 20.5 degrees as measured carefully with a starrett combination angle gauge.
- Ramped vs. non-ramped barrels? - 1911ForumRamped barrels in 45 ACP are not needed, but can be a safety margin if shooting 45 Super. Ramped barrels are a must if shooting 38 Super loaded to IPSC major power levels. Ramped barrels are a better mouse trap when it comes to the 40 S&W. Ramped barrels may provide a safety margin with 10mm if maximum velocity is your goal.
More
