P1s | search
Click here to view P1s news from 60+ newspapers.
Bookmark or Share- Best print settings for ABS? P1S : r/BambuLab - RedditYeah. Set your min. Layertime to about 12-15 sec. Lower cooling to 10-20% im using 10% for all layertimes fixed.. You wont get good layer afhesion with 3 sec layertime and 80% fan with abs. Preheat your chamber to about 40C before printing. Im using a bed temp of 110C and 265C Nozzle. Works perfect (Fiberlogy Abs). 2.
- What are your must-have mods for P1S? : r/BambuLab - Reddit229 votes, 44 comments. true. Riser for AMS and ventilation, Swifty because it only took like two minutes, feed guides for the PTFE tubes, Y-splitter for the filament dryer, hinged cover for the P1S display so the glow isn't annoying, a few respool spools for any cardboard spool filaments I pick up (and then a Pastamatic to do the respooling).
- Questions on using the p1s to print with abs : r/BambuLab - RedditQuestions on using the p1s to print with abs. Question. Sorry for bothering you all, but i had a question on using the p1s for abs filament. i know the printer is compatable with abs, but i wanted to be sure of some things before i started printing with it. 1: does the enclosure prevent warping and splitting (layers coming apart, leaving holes ...
- p1S upgrading to print Nylon carbon fiber and everything else ... - RedditGetting the hardened steel nozzle is a must, but another difference is the hardened extruder gears too. Not for PA-CF, but other filaments may require a bed temp beyond 100C, which the P1S won't do.
- Printing Nylon-CF on P1S : r/BambuLab - RedditIt's a little more flexible/rubbery, but if your application doesn't need the rigidity I'd avoid CF. Plus, plain nylon can be dyed. :) Warping shouldn't be a big issue with PA6 with the enclosure. Might need a brim for smaller pieces without much surface contact to the build plate. P1S with hardened nozzle and extruder gears should be fine.
More
