Orca Slicer | search
Click here to view Orca Slicer news from 60+ newspapers.
Bookmark or Share- Post Processing gcode for Timelapse : r/OrcaSlicer - RedditI'm looking for information on how to insert Post Processing gcode before each layer change in Orca. I need to be able to insert TIMELAPSE_TAKE_FRAME so that it occurs before each layer change so Klipper knows to take a time-lapse frame each layer change. Any help would be greatly appreciated.
- Orca Slicer Calibration Test Order : r/crealityk1 - RedditOrca Slicer Calibration Test Order My K1 works fine in general but does have an occasional minor issue. I wanted to try the Orca Slicer Calibration routines so many comment about to see if I get any improvements.
- Stringing after switching to orca slicer. : r/FixMyPrint - RedditOrca slicer seems to only do a wipe OR a retract. If I turn off wipe, I'll get a retract. But with wipe turned on it'll be a wipe only, no retract. I believe this is the cause of the extra fine fluff I've been seeing. Unfortunately I can't find out how to make Orca do both moves. In the screenshot below, Left is Orca, right is Bambu Studio.
- Can you stack 2 stls? So one prints on top of the other?I hacked ths once, because I couldn’t find a way to make an stl not fall to the bed in the slicer. I made my end gcode not disable steppers. Then printed object 1. Then object 2 had a tiny cube it printed in the corner, that was exactly as tall as object 1, and then it had the part I wanted to print floating in the air, exactly where part 1 ...
- Tip: Embossed/Debossed Text : r/OrcaSlicer - RedditJust wanted to share this. So I've occasionally decided to try embossed/debossed text in Orca Slicer, only to find that positioning was difficult, often not staying where I placed it, resorting to using Fusion360. Then today, I decided to "assemble" the text and the model beforehand (in Orca Slicer), and magically the text goes where I tell it to.
More
