Nxp | search
Click here to view Nxp news from 60+ newspapers.
Bookmark or Share- INTM not working as expected - NXP CommunityI have a very confusing problem here. My chip model is S32K312. The clock configuration selected is option B. The STM clock is 48M, and the INTM clock is 60M When the STM timing interrupt is 100ms, my test is as follows： （0x00DBBC06 - 0x00927E0A）/ 48000 = 99.99 According to the value of STM...
- ADD libraries in a New Project with McuXpresso - NXP CommunityHI. I'm developing an application with PN7462au and its board PNEV7462c. I tooken a look at the examples in PN7462AU-FW_v05.22.01_Full. For example there is the example PN7462AU_ex_phExDoorAccess that use some libraries like PN7462AU PHOSAL ETC. Now i want to add those libraries to my test project to use the functionalities offered by them.
- Solved: HSE FW install for S32K310 - NXP Community52 Views. lukaszadrapa. NXP TechSupport. Hi @LeoYang-. I usually recommend to create new project directly for used derivative and then port the code. However, I believe that this project will work just with the changes you did. Used features are the same on both derivatives. Yes, the firmware support both S32K310 and S32K311:
- IOH: Getting started with IOH in custom projects - NXP ... - NXP CommunitySteps in general. In general, the following steps should be followed when using an IOH library in a custom project: 1. Add the IOH library (*.lib, *.a) to the project. 2. Add the path where the library's header file resides to the project’s include path. 3. #include the IOH header file in the source code of the application.
- Re: How to use S32K344 BIST? - NXP CommunityJulián_AragónM. NXP TechSupport. Hi @li3, 1. There are 2 blocks of SRAM with an independent controller. PRAM0 controls the first 160 KB of RAM where 32 KB supports content retention in Standby mode and 128 KB is available only in Run mode. PRAM1 Controls the second 160 KB and is available only in Run mode. 2.
More
