Notch | search
Click here to view Notch news from 60+ newspapers.
Bookmark or Share- Where is number 1 on an MSD cap? - Ford Mustang ForumsBy the way. #1 on the cap is by the D in MSD. 1989 Ford Mustang Notch 5.0. 1979 Ford Fairmont Boxtop (LSX/4.8/Big BW Turbo) Reply Like. O. ocalafox. 231 posts · Joined 2003. #7 · Feb 26, 2009. "Ignition (timing) will be fine, but injectors would be off."
- 331 Scat stroker clearance - Ford Mustang ForumsI keep reading online and some people say notching is required for a stroker and some say a 331 is fine. Hope not, that 331 in my LTD LX hasn't made any noises, so clearance must be good. David Claflin, Youtube: FXRSDriver. 1984 LTD (Former Dugan Racing wagon) in work, AFRs, 306, RPMII, T5, 4.10s,
- Cold start issue - 88 5.0 notch | Ford Mustang ForumsCold start issue - 88 5.0 notch. I just picked up an 88 notch and she runs awesome when warmed up. But when I start it when its cold it takes a couple extra rotations of the motor to fire up and then when she fires up if you give it gas it sounds like it wants to stall and cuts out. If I were to try to drive right away it would stall.
- Do you have to notch block for a 331? - Ford Mustang Forums282 posts · Joined 2007. #3 · Jul 13, 2007. I didn't have to notch mine for clearance, but I did it anyway to be on the safe side. 88 block, CHP 331 street fighter , AFR 185s, 1.6 RRs, FTI cam, RPM II intake, 70mm TB, 75mm MAF, Diablo custom tune Revolution chip, 3.73s, Viper T-56,Eibach pro-kit, bilsteins, hotchkis CC plates, UPR double adj ...
- Diy piston notching tool - Ford Mustang ForumsInsert the blade under the plastic and remove it from the disk. Pic 1. 2 clean the face of the valve with the drill and wire brush. Pic 2. 3 mix 5 min epoxy according to instructions pic 3. 4 use toothpick to apply epoxy to the face of the valve and put the modified roloc disk on to the face of the valve. Pic 4.
More
