Nacelle | search
Click here to view Nacelle news from 60+ newspapers.
Bookmark or Share- What is the difference between a nacelle and a cowling?11. The nacelle is a housing that is separate from the fuselage, that holds something, usually engines or some other equipment in an aircraft. The following figure shows some of the engine nacelles. Source: adg.stanford.edu. A cowl or cowling is any part of the aircraft (or engine nacelle) that can be opened or removed (for inspection etc.).
- noise - Why does the Boeing 787 engine nacelle exhaust have such an ...To combat the sound of jet-blast from the rear of the engine, Boeing, General Electric, and NASA developed serrated edges called chevrons for the back of the nacelle and the engine exhaust nozzle. The chevrons reduce jet blast noise by controlling the way the air mixes after passing through and around the engine.
- Headlight Nacelle - Indian Motorcycle ForumI drilled a hole at the bottom of the nacelle in order for it to hug around the stock sixty headlight. The hole is so that a screw under the sixty headlight will fit through. And the hole is not noticeable. Only think that’s a little off is that the nacelle doesn’t sit all the way up on the forks. There’s about half an inch between the ...
- aircraft design - Why are the Boeing 737 nacelles odd shaped ...You are confusing the shape of the engine with the shape of the nacelle. Axial-compressor jet engines (standard on larger commercial jets) are invariably round and thin 1 . Engines with a centrifugal compressor are fatter in the middle and will occasionally be lumpy shapes depending on the internal airflow (some engines completely reverse the ...
- Installed an OEM Bobber Nacelle on my ScoutInstalled an OEM Bobber Nacelle on my Scout. Hello all. I was lucky enough to score a stock Bobber Nacelle for cheap, so I thought I’d try to install it on my regular scout today. After a bit of drilling, and a lot of filing, it is fitting nicely over the stock scout headlight. Its not 100% perfect, but its close enough for me (at least for ...
More
