Interference | search
Click here to view Interference news from 60+ newspapers.
Bookmark or Share- Potential Wi-Fi Interference with RTL-SDR Dongle: Solutions?If you experience interference then try and unplug a device from power and for a computer screen you can change the refresh rate and resoltion to see if the interference changes. I have had great success using extra shielded CAT 6 and CAT 7 network cables and using USB cables that has a ferrite lump to reduce RFI coming out of devices.
- Interference tracking on TRS - RadioReference.com ForumsWhat is best practices for running down interference into a TRS? I have seen scanners, KrakenRF, and even service monitors paired with a preamp or even BDA. Often the problem is an out of spec BDA but not always. The monitor approach does let you “see” the signal characteristic.
- Cleaning up noisy signals, band stop filter, and interferenceI'm sure I have interference I'm just not sure where to start with it. My first concern is the FM radio band 88-108. I have 3 stations broadcasting from about .4 miles away at 250 watts (94.1, 98.5, 103.1) they sit about 300 feet above me so pretty good line of sight.
- Power line interference and digital radioAlso, it doesn't matter how the audio is modulated (P25, NXDN, DMR, analog, etc) interference affects the frequency range so everyone is affected. We have more issues with EMI generated from cheap switching power supplies, lighting fixtures, electronics, vehicle computer systems, and even your cheap 12V cellphone charger.
- Heavy Interference on FRS/GMRS Channel 16 (462.575MHz)I am receiving intermittent but heavy interference in my city on FRS/GMRS Channel 16 (heard between 462.570-462.580 MHz.). Can anyone advise me how best to track down the source and/or interest the FCC in doing so?
More
