Input | search
Click here to view Input news from 60+ newspapers.
Bookmark or Share- The Definitive DSD+ Passive Digital Monitor ThreadThe only thing needed are to set the input level so that the oscilloscope window have the signal between 3/4 and full screen. Then run dsdtune.exe after you have manually recorded a digital signal using the R button to start and stop the recording, and it will try out the best settings to use in a bat file to decode that signal in the best ...
- How to program repeaters into a Baofeng UV-5R.Guide to programming repeaters into a Baofeng UV-5R I see a good bit of threads about how to program repeaters and so on.. Lets start.. 1. Power on your Baofeng 2. Hit the VFO/Memory button to enter "frequency mode"(VFO) 3. Hit the menu button, enter the number 7. You will want to hit Menu...
- Tweaking DSD plus for better audio - RadioReference.com Forumsand then feed it to dsdtune,like this dsdtune.exe -i 1R-DSDPlus-Raw-Input_2023-04-11@103713.wav-f1 and it will spit out some values, like this, : Best Decode on file 1R-DSDPlus-Raw-Input_2023-04-11@103713.wav was 35748 with options -f1 -ds75 -dd10 -dv20 that you enter into your DSDPlus start up script.
- Confusion about input/output tone vs. Transmit/ReceiveConversely, is the "output tone" the same as The R-DCS or R-CTCS? I am trying to access a repeater on 462.700 that the input tone is a DCS I think (provided by the owner so I'm not publishing) and the output tone is 141.3 (Which is different than the provided input tone and I'm struggling to understand what each tone means and how they function.
- DSDPlus not finding audio input device, only outputsDsdplus window, input menu, choose your vb cable, , output menu,, choose your speakers,, control menu,,choose passive digital monitor You'll want to unchecked listen in the sound mager recording tab for the vb cable
More
