Fdoc | search
Click here to view Fdoc news from 60+ newspapers.
Bookmark or Share- FD Owners Club - FDOCDiscuss anything FD3s interior related from seats to custom upholstery. The place to discuss all things suspension, tyres, wheels, brakes, bracing etc. Spotted another RX7 in the wild, try to find out if its a member here. Find all the common fd3s ecu systems ask question, map shares. Found a classic rx7 video online or want to share one of ...
- Rx7 fd wont crank | FD Owners Club - FDOCApr 1, 2021. #1. Hey guys ive created another issue now. I fitted my fuel sock and pump back into the car and was priming the fuel lines by turning the car over a few times and then all of a sudden the starter wouldnt crank anymore. The starter was always a bit tempermental anyway so i fitted a brand new one which i got from rotors7 a while ago ...
- Deciding on Spring Rates for Coilovers. | FD Owners Club - FDOCIn the Rear, An 8KG/mm spring rate is around 3.64KG/mm wheel rate. Alternately, A 6KG/mm spring rate in the Rear is around 2.73KG/mm wheel rate. So you see that 8KG Front & 6KG Rear, actually requires a similar amount of force to move the wheel closer to the body (~27-28KG for 10mm compression).
- Updating the sequential system (no I can't go single yet) - FDOCHot test your solenoids, heat them in the oven, then give them 12V + GND, and check they still click nicely (I've had some work fine at room temp, but fail at engine bay type temps) Simplified sequential setup. Inspect and buzz through your wiring harness to check the solenoids are getting connection to ecu/12v etc.
- Belt and pulley options for air pump delete - FDOCNeil Atkinson. Mar 8, 2024. #4. I also don’t have air pump and aircon and I have a GReddy pulley kit (from memory, larger alternator and water pump pulleys) For the alternator, water pump and rear of bottom pulley, I use a 5PK780 belt. For front of bottom pulley to power steering, I use a 6PK915 belt. Mid Night FD.
More
