Edc | search
Click here to view Edc news from 60+ newspapers.
Bookmark or Share- Understanding the sizing and limits of PPT TDC and EDCEDC: 117 Run OCCT CPU stress and if you hit 100 percent on EDC in Ryzen master. Up the EDC value in increments of 1 until you hit 98-99 never 100. To test the other 2 run cb15/20 all core. watch it in real-time with hwinfo at 500ms. Adjust TDC/PPT based on your all core clocks with runs of cb 15/20
- ryzen master EDC limit for 100% cpu load - Overclock.nethello. if this has been covered elsewhere i apologize, please redirect. i was looking to overclock my 2700x on my gigabyte x470 aorus gaming 7 wifi but notice that at stock ryzen master shows that the % EDC (electrical design current) is near the maximum of 140A (oddly there is a EDC value of 140A that the percentage is calculated from but a "limit" of 168A). this is with all cores operating ...
- Guide - Fully optimise your PBO - Overclock.netAfter you got your EDC value you do the following, set EDC to double your value, yeah I can hear you thinking, "but why do we want to do that", well now we are going to use the CPU VDD Telemetry section 7a. CPU VDD_SoC Current Optimisation: Custom Setting 7b. CPU VDD Full Scale Current: The optimal EDC setting for your system as previously ...
- 9950X voltages - Overclock.netThe 9950X has a default TDP of 170 W. If you want to use the full performance and your cooling is good, then the PBO profile would be for the TDP 170W setting: PPT=230W, TDC=160A, EDC=225A. I would assume so far this is doable without stability issues. If you want to proceed, you can set the Boost Override (default=0) higher to a maximum of ...
- 5800X3D Owners - Overclock.netIt's also not TDC/EDC/PPT limited through virtue of not hitting the limiters, so less power doesn't help anything. The only time I've observed similar behavior on normal Zen3 is when PPT is cut so far down the CPU now doesn't have headroom to boost right, like PPT 50 on a 5950x.
More
