Carcass | search
Click here to view Carcass news from 60+ newspapers.
Bookmark or Share- carcass - How to build wardrobe with top shelf? Actual shelf, or two ...The long rail along the back of the carcass then gives you support for the long dimension of the shelf, which at 1600mm will be quite valuable. If you're using a composite material like particle board or mdf for the shelf, or if the shelf is more than 20cm or so wide, you should also screw a rail to the front of the shelf, to stiffen it.
- terminology - What part of a cabinet is the "carcass"? - Woodworking ...The carcass is the main framework, or body, of the object. It is what remains after you strip all coverings, doors, front-face panels, frames for these panels, and (non-structural) shelves. It is the framework of a structure, and is generally not seen.
- Understanding how to fit euro style half overlay hingesCarcass is 3/4" and I would like to get roughly half of it covered (9 or 10mm). I am reading about half-overlay hinges but it seems that they have a specific application (namely side-to-side cabinets with single panel).
- Flush fitting to an uneven surface - Woodworking Stack ExchangeThe basic thing you're asking about requires what is called scribing.It's a common technique, employed every day in fitting things to walls for a tight fit and there are numerous tricks on how to do it, and tools sold for the purpose (but don't buy any of them!), as you'll see if you Google it now that you know what the technique is called.
- joinery - What are some best practices and techniques for building ...In all cases, you should usually also glue the joints for improved strength; if using a nailgun the nails only serve to hold the carcass (cabinet box) together while the glue dries. You can hide your fasteners by strategically positioning them.
More
