Briggs | search
Click here to view Briggs news from 60+ newspapers.
Bookmark or Share- briggs and stratton compression | Lawn Mower ForumJul 29, 2024 / briggs and stratton compression #1 have a b&s model 44u877-0005-g1 serial number 180123yg : owner said was running good then heard a pop stopped mowing parked, did a compression check found both cylinders were 60 psi, one plug had a little moisture on it other was dry.
- B&S compatibility (parts swapping) | Lawn Mower ForumBriggs engines are in series or families with the same capacity. Small Hp differences are done with carbs , big differences are done with bore & stroke. The easiest way to see if the heads SHOULD interchange is to check the part number of the head gaskets for each engine. If it is the same the heads should interchange.
- Intek v-twin valve adjustment procedures | Lawn Mower ForumWhat valve adjustment procedures do you use on Briggs Intek V-twins? I'm aware of the factory procedure (setting each cylinder at 1/4" off TDC), but I'm curious to know how many are actually doing this versus setting them at TDC or setting one valve when the other is all the way open.
- 19 horse Briggs & Stratton will only run with choke half onChanged carbs adjusted valves still the same thing hunts real bad only runs with choke half on. Changed carb head gasket and lapped the babes still hunts an dies without choke on
- Using steel lift rods instead of aluminum | Lawn Mower ForumHey all, I have a broken intake pushrod with my Intek/Briggs&Stratton 331777. About 2 years ago I blew the head gasket. I fixed it and all was well until about 2 weeks ago when aluminum intake rod broke in half. I took off the head and pull the pushrod out, which had broken right in half...
More
