Blinding | search
Click here to view Blinding news from 60+ newspapers.
Bookmark or Share- Blinding - Concrete Engineering general discussion - Eng-TipsAgree that blinding concrete (or what I call a mudmat) is a good idea many times for ease in setting formwork and steel, to prevent damage of the founding soil in case of rain or just construction (workmen) damage. You could use a good crushed stone layer as well . . .
- Blind Flanged on reactor vessel - Thickness and shapeI need to performe a pressure hydraulic test on a reactor vessel which has a diameter of aprox 3 meters and an opening on the top of about 1,5 m diameter long.The pressure test will be 30 bar. I was thinking of installing a blind straight flange on the opening but i was told that the flange...
- How to change units without converting! - Eng-TipsIf you must scale the entire part, you need to scale all linear dimensions. If you can not automate this, you may miss a dimension or two in the midst of the blinding tedium. To avoid missing any dimensions, first export your model, import it to a new part file and scale that. Overlay the two parts in a temporary assembly.
- underlays to concrete: blinding, poly sheet, sand - Eng-TipsAdding to cvg, I would only use blinding concrete if, as he says it is rough rock surface - it is really called dental concrete where I come from. the use of vapour barrier is beneficial if the flooring of the building cannot take the moisture that could pass through - still you want to wait as long as possible before you place the flooring as ...
- Retaining Wall Shear Key 2 - Eng-TipsThe friction surface will develop below the bottom of blinding under the key and for developing of shear surface, some passıve pressure should develop , that is the wall should move slightly.. behind the shear key , the active pressure developing will be negligible or zero, since the bearing pressure under the footing around heel will be minimum.
More
