Simultaneously | search
Click here to view Simultaneously news from 60+ newspapers.
Bookmark or Share- How to setup multiple WiFi networks? - Raspberry Pi Stack ExchangeR to refresh the list. Use the cursors on the keyboard to navigate up and down the list. Press right to configure the wireless connection. Press down a few times and check "Automatically connect to this network". Press down a few times again and type in your password in the key field.
- Connect WiFi and Ethernet simultaneously - Raspberry Pi Stack ExchangeProblem Description. The problem is that when I connect the Ethernet cable, the raspberry is unreachable on the WiFi network and can't access the internet from it, but both seems to be connected ifconfig: eth0: flags=4163
mtu 1500. inet 10.10.7.201 netmask 255.255.248.0 broadcast 10.10.7.255. - Raspberry 4B - Dualband 2.4GHZ and 5GHZCan RPi4 run simultaneously on dual band (WiFi 2.4GHz / 5GHz)? You wrote: Any ideas how to continue with a proper config? You don't tell us what this proper config should be. If you mean to have a dual band access point, then I quote the second sentence behind the link: If one interface is used as access point (AP) you can only use one band.
- How to send audio to BOTH headphone jack and HDMI simultaneously?So now we've verified some old news: analog headphones jack vs. digital HDMI. From my point of view those two should be addressed separately and independently thus also (quasi-)simultaneously. Now PulseAudio should be able to stream from one source to multiple pieces of sound hardware. I still wonder why there's nothing to find on the web ...
- Can RPi4 run simultaneously on dual band (WiFi 2.4GHz / 5GHz)?Yes, it is possible to run a RPi 4B simultaneously on dual band (WiFi 2.4GHz / 5GHz), but only with predefined interface combinations given by the hardware. If one interface is used as access point (AP) you can only use one band. First to clarify: you are talking about RPi 3B, the link you have given is talking about a RPi 3B+. This is an ...
More
