Fulcrum | search
Click here to view Fulcrum news from 60+ newspapers.
Bookmark or Share- Rocker arm fulcrum - Ford Power Stroke Nation(2) Or maybe just start your fulcrum bolts, snug down your ARP head studs so the head wont raise. Make your torques on the rocker arm fulcrum plate then go back and torque the ARP studs down to 210 ft/lb. (3) Another way I see it is to just snug the top five ARP head studs that don't interfere with the rocker arm fulcrum plates, then torque all ...
- SECTION 303-01C Engine — 6.0L Diesel - Ford Power Stroke NationGeneral Specifications (Continued) Item Specification Main bearing journal diameter — 0.508 mm (0.020 in) undersize 80.4793-80.5047 mm (3.168-3.130 in)
- Rocker arm replacement - Ford Power Stroke Nationlifters would require head removal yes. you don't have to pull the injectors for the fuel rail, but you will have to replace the fuel tubes. you wont have to pull the turbos for the hpfp line, those you could try and reuse as if they leak it wont be going inside the engine.
- Broken Rocker arm bolt | Ford Power Stroke NationI did pushrods back before the winter, due to a slight miss, found none bent, but one fairly worn rocker fulcrum. Let the motor bleed down overnight before i put everything back together, and used a good quality torque wrench to take them to 20 ft lbs. No binding was apparent.
- what is the cause of the "6.0 lifter failure" - Ford Power Stroke NationWith the rocker back in place with the ball, brand new retaining clip and fulcrum tightened down, you can reach in and remove the valvebridge. Scanner only showed a fault in cylinder 8. Here is a short video of the rocker and valvebridge.
More
